Blue Star Ductable AC Air-Cooled Ducted Split Air Conditioners 3, 4.3, 5.5, 8.5, 8.75, 11, 16.5, 22 Tons (TR)

Specifications (Zoom to view the specs)

Can Operate at Higher Ambient temperatures

In this new series of ducted systems, the condenser is innovatively designed to operate effectively even at higher ambient/atmospheric temperatures, up to 50 degrees C, resulting in efficient cooling even in the peak summer months in India, without tripping.

Reduced Noise Levels

The bird-wing design leads to highly efficient fans. These fans are fitted in the outdoor units and that results in reduced noise levels.

Reduced Running Cost

Larger coil face area, and the use of high efficiency fans help in decreasing the condensing temperature. And that results in lower energy consumption and thereby lower operating cost.

Service-friendly Design

The design of the outdoor unit is developed in such a way that service/maintenance can be easily carried out. Easy access to the control panel, compressors, and the fan motor ensures that these critical parts can be easily repaired or maintained. 

Use of Scroll Compressor

Blue Star leverages the latest scroll compressors in its ducted split air conditioning systems.

Microprocessor Controller

LCD display comes with Seven-segment # Provision for fire alarm input # Touch-key on/off switch # Fault display panel # Auto restart feature after the power failure # Time delay feature for compressor operation # Single-phasing as well as in-built phase reversal protection # Run-time equalization # Accurate temp. control +/- 10 degrees C # Non-volatile memory

Corrosion-resistant Body and Blue Fin Condenser

Blue fins and the use of power coated Galvanized sheets results in corrosion resistant units. This improves the lifespan of the entire system.

Advantage of using Multi-compressor

Higher part-load efficiencies are possible since the full evaporator surface is available even if a single compressor is working during the part-load.

Run-time Equalization

The microprocessor that’s built in the controller ensures that all the compressors run equally in a multi compressor unit.

Hydrophilic Coating

The Hydrophilic Coating is provided on the fins of the evaporator coil. This coating helps in retaining the moisture on the fins and subsequently this moisture is then transferred to the drain system.

EPE Insulation

EPE Insulation of the evaporator helps in reducing loss of cooling.

DIDW Blower Design

Use of a DIDW centrifugal blower produces higher air throw.

Efficient Air Filters

Non-woven polyester material is used to develop air filters. These filters are much more efficient and can be cleaned rather easily.

Voltage Range of 360-440V